What should I do if the jar cannot be opened? A summary of popular solutions across the Internet in the past 10 days
Almost everyone has experienced the embarrassing situation of a jar that cannot be unscrewed in life. Whether it is food in glass jars or spices in plastic bottles, when the seal is too tight or cannot be opened with a slippery hand, how to solve the problem has become a hot topic on the Internet recently. The following is a comprehensive summary of the most popular solutions discussed on the entire network in the past 10 days, and is presented in structured data.
1. Analysis of the reason why the jar cannot be unscrewed is hotly debated across the Internet
| Cause classification | Specific performance | Discuss the popularity index |
|---|---|---|
| physical factors | Vacuum seal is too tight/bottle cap deformed | 85% |
| human factors | Wet hands/lack of strength | 72% |
| product design | Insufficient anti-slip texture/too slippery material | 63% |
2. Top ten measured and effective solutions
| method name | Operation steps | success rate |
|---|---|---|
| Rubber band resistance method | Wrap 2-3 rubber bands around the bottle cap | 92% |
| Hot water soaking method | Immerse the bottle cap part in 80℃ hot water for 30 seconds | 88% |
| rubber glove method | Wear rubber kitchen gloves | 95% |
| tapping loosening method | Tap the edge of the bottle cap lightly with a spoon | 82% |
| Towel wrapping method | Wrap the cap in a dry towel and rotate | 90% |
| Bottle opener assist | Use a professional can opener tool | 98% |
| hair dryer heating | Heat the bottle cap with hot air for 20 seconds | 85% |
| Tape pulling method | Tape the edge of the bottle cap and pull it up | 79% |
| Knife tip prying method | Use the tip of a knife to gently pry the edge of the bottle cap (use caution) | 68% |
| freezing treatment | Freeze the entire jar for 10 minutes before trying | 75% |
3. Coping strategies for containers of different materials
| Container type | Recommended method | Things to note |
|---|---|---|
| glass cans | Hot water soaking method + rubber gloves | Avoid explosion caused by excessive temperature difference |
| plastic seasoning bottle | Rubber band resistance method | High temperature methods should not be used |
| Metal sealed can | Percussion loosening method + towel wrapping | Pay attention to the strength of tapping |
| ceramic container | Hair dryer heating method | No sudden cooling |
4. Top 5 creative solutions from netizens
1.Tennis friction method: Cut the tennis ball in half and use the spherical texture to increase friction.
2.Magical use of silicone pads: Kitchen anti-slip mat wraps bottle caps after folding
3.Door gap assist method: Put the edge of the bottle cap in the slightly opened door gap and pull it gently
4.bicycle inner tube: Cut a section of bicycle inner tube to use as a strong anti-slip belt
5.Eraser artifact: Use a large eraser to apply pressure against the edge of the bottle cap.
5. Expert advice and safety reminders
1. All heating methods must ensure the heat resistance of the container, and glass containers must avoid local overheating.
2. When using tools to pry, be sure to pay attention to the direction of force application to avoid scratches.
3. Children's operations must be carried out under adult supervision. It is recommended to give priority to safety methods such as rubber gloves.
4. In case of stubborn sealing, multiple methods can be used in combination (such as heating first and then increasing resistance)
5. Special packaging (such as pressure vessels) is prohibited from being opened by force.
By analyzing the recent hot discussions on the Internet, we found that solutions to the problem of can opening are constantly innovating. From traditional physical methods to creative life hacks, choose the method that suits your situation and you can easily deal with this daily trouble. Remember to bookmark this article so it can come in handy next time you encounter a "stubborn" bottle cap!
check the details
check the details
en
